• Uncategorized 27.06.2016

    Optical fiber is a gift of modern technology moreover the most proficient medium of transferring values at enormity speed. Due to their feature of “high speed data transfers”, many communication networks today bank on fiber optics.
    Fibers are the thread like structures created up concerning glass or plastic need light cress as a profession to transfer information from one location to another. The downside of this high speed guided conductance medium is that they are easily vulnerable to contamination besides damage which may gradually diminution their performance. As a result, cable loses its efficiency and may affect the sweeping performance of the network.
    Therefore, routine checking and testing is a simple and effective way to ensure optimum functioning of these cables. There are several types of nature optic testing equipment available in current marketplace. The main multiphasic of these devices is to ensure that cable has bot installed properly, to check reflectance from all connections and splices, to locate areas for retread quickly.
    Below mentioned are some common types of testing performed on optical cables:
    * End-to-end disoriented testing: In this method, both units (light source and power meter) are connected with the refine jumper. Optical power cadence is a “device accepted to measure effort of an optical signal”. Sometimes synonym as a fiber restore cord, a fiber jumper is a cable old for connecting equipment on either end of the link. Optical light source is a testing device used to measure the loss for both particularize and multimode fiber cables. As a outcome of this test, is both units have same wavelength review will be accurate.

    * Cable commissioning: This test is performed to check cable for damage, and attenuation. It also measures the polarization mode dispersion. In this test, fiber cable that is to be tested is connected at both ends to automatic catechization units (light source and prerogative meter).
    * Splice and connector optimization: This test is performed to measure the loss of joined conjugate of connectors. Otherwise, the gap in the connection may cause insertion loss and reluctance. OTDRs (optical time-domain reflectometer) are consumed for verify different events like splice loss on long fiber cables with inline splices or for troubleshooting.
    In the current marketplace, there are varieties of fiber optic kits, equivalent cleaning and testing tools are present that are used to complete the required tasks concerning cleaning and testing concerning cables andconnectors.

    Posted by kid @ 6:30 am

  • Comments are closed.